Strainer 800 lbs (~ PN 100) Y-type, socket-weld-ends with drain-plug in cover

socket-weld-ends BSP

Materials:

Body: forged steel C22, Screen. Stainless steel AISI 316, Gasket: graphit + AISI 316

Connection:

socket-weld-ends BSP

Test pressure:

205 bar

DN L A Mesh-width* Weight (kg) Article No.**
3/8" 90 60 0,8 9,00 0206515303800
1/2" 90 60 0,8 12,00 0206515301200
3/4" 110 75 0,8 13,00 0206515303400
1" 130 85 0,8 16,00 0206515304400
1 1/4" 160 120 0,8 25,00 0206515305400
1 1/2" 160 120 0,8 29,00 0206515306400
2" 160 160 0,8 43,00 0206515308400

* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"

DN L1 D1 Fo KVS1 KVS2 Zet1 Zet2 ø G ø R P D B
3/8" 41 18 38 % 5,1 5,0 1,56 1,60 36 29 3,5 1/4" 85
1/2" 41 18 38 % 5,1 5,0 1,56 1,60 36 29 3,5 1/4" 85
3/4" 60 22 38 % 9,7 9,6 2,22 2,27 40 33 3,5 1/4" 135
1" 75 28 38 % 14,6 13,3 3,07 3,71 50 41 3,5 1/4" 170
1 1/4" 110 41 38 % 32,6 29,9 3,84 4,52 74 57 3,5 1/4" 230
1 1/2" 110 41 38 % 32,6 29,9 3,84 4,52 74 57 3,5 1/4" 230
2" 100,5 49 38 % 50,3 49,8 3,84 3,92 79 66 3,5 1/4" 240

The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.

Key for our datasheets

socket-weld-ends BSP
DN Nominal diameter
L Face to face dimension (mm)
A Centre line of pipe to end of cover (mm)
L1 Screen length (mm)
D1 Screen diameter (mm)
Fo Free screen area standard element (mm)
KVS1 KVS-Value standardscreen (m3/h)
KVS2 KVS-Value fine screen (m3/h)
Zet1 Zeta-Value standardscreen
Zet2 Zeta-Value fine screen
ø G Outer-diameter coverflange gasket (mm)
ø R Inner-diameter coverflange gasket (mm)
P Thickness coverflange gasket (mm)
D Coverflange size
B Distance required to remove screen (mm)