Strainer PN 10 Y-type, with flanged ends and drain-plug 1/2”BSP in cover
Materials: |
Body: cast iron JL 1040,DN 350/400 GGG 50 (ENG-GJS-500-7), Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301), Gasket: graphit reinforced/DN350: EPDM |
Connection: |
flanged ends DIN |
Test pressure: |
15 bar |
Specials: |
Valves made of cast iron are not authorized for use in systems subject TRD110. |
| DN | L | A | Mesh-width* | Weight (kg) | Article No.** |
|---|---|---|---|---|---|
| 200 | 600 | 360 | 1,20 | 99,50 | 96010200 |
| 250 | 730 | 550 | 1,20 | 162,00 | 96010250 |
| 300 | 850 | 610 | 1,20 | 280,00 | 96010300 |
| 350 | 980 | 590 | 2,80 | 450,00 | 96010350 |
| 400 | 1100 | 640 | 2,80 | 520,00 | 96010400 |
* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"
| DN | L1 | D1 | Fo | KVS1 | KVS2 | Zet1 | Zet2 | ø G | ø R | P | D | B |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 200 | 360 | 208 | 36 % | 820,00 | 769,00 | 3,81 | 4,33 | 240 | 209 | 2,0 | Ø 290 | 580 |
| 250 | 336 | 231 | 35 % | 1260,00 | 1108,00 | 3,94 | 5,09 | 319 | 275 | 2,0 | Ø 345 | 830 |
| 300 | 38639 | 281,5 | 35 % | 1735,00 | 1520,00 | 4,31 | 5,61 | 379 | 320 | 2,0 | Ø 401 | 950 |
| 350 | 520 | 360 | 35 % | 953,00 | 953,00 | 4,20 | 5,10 | 347 | 333 | Ø 530 | 950 | |
| 400 | 35 % | 1089,00 | 1089,00 | 3,50 | 4,20 | Ø 580 | 1150 |
The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.
Key for our datasheets
| DN | Nominal diameter |
| L | Face to face dimension (mm) |
| A | Centre line of pipe to end of cover (mm) |
| L1 | Screen length (mm) |
| D1 | Screen diameter (mm) |
| Fo | Free screen area standard element (mm) |
| KVS1 | KVS-Value standardscreen (m3/h) |
| KVS2 | KVS-Value fine screen (m3/h) |
| Zet1 | Zeta-Value standardscreen |
| Zet2 | Zeta-Value fine screen |
| ø G | Outer-diameter coverflange gasket (mm) |
| ø R | Inner-diameter coverflange gasket (mm) |
| P | Thickness coverflange gasket (mm) |
| D | Coverflange size |
| B | Distance required to remove screen (mm) |