Strainer PN 25/40 Y-type, with flanged ends and drain-plug 1/2” in cover

flanged ends DIN

Materials:

Body: GS-C 25, Screen: stainless steel 1.4301, Gasket: graphit reinforced

Connection:

flanged ends DIN

Test pressure:

60 bar

DN L A Mesh-width* Weight (kg) Article No.**
15 130 75 0,50 2,50 20325015
20 150 75 0,50 3,00 20325020
25 160 90 0,80 4,00 0206040602500
32 180 90 0,87 5,00 20325032
40 200 110 0,80 7,00 0206040604000
50 230 120 0,80 11,00 0206040605000
65 290 140 0,87 18,00 0206040606500
80 310 165 1,30 23,00 0206040608000
100 350 220 1,30 31,00 020600610000
125 400 260 1,32 48,00 20325125
150 480 300 1,30 61,00 0206040615000
200 600 360 1,32 153,00 20340200

* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"

DN L1 D1 Fo KVS1 KVS2 Zet1 Zet2 ø G ø R P D B
15 62 22,5 39 % 2,70 2,50 2,14 2,50 39 27 1,5 40x98 oval 120
20 62 22,5 39 % 8,80 7,10 2,14 2,50 39 27 1,5 40x98 oval 125
25 78 25 38 % 16,90 15,50 2,14 2,55 40 26 3,5 48x78 oval 150
32 86 35 38 % 25,00 20,60 2,58 3,87 56 40 1,5 54x89 oval 170
40 105 44 38 % 38,00 33,20 2,83 3,67 60 45 3,5 70x72 205
50 120 49 38 % 56,00 47,50 3,11 4,36 65 51 3,5 91x95 250
65 120 65 38 % 89,00 72,70 3,51 5,28 95 80 3,5 100x110 285
80 130 80 38 % 127,00 96,80 4,02 6,90 110 95 3,5 121x131 330
100 170 100 36 % 200,00 167,00 3,92 5,63 135 120 3,5 137x145 415
125 198 120 36 % 332,00 284,00 3,49 4,77 172 146 2,0 175x190 484
150 230 150 36 % 494,00 389,00 3,26 5,26 190 170 3,5 Ø 306 535
200 290 186 36 % 675,00 570,00 5,50 7,60 260 212 2,0 Ø 345 720

The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.

Key for our datasheets

flanged ends DIN
DN Nominal diameter
L Face to face dimension (mm)
A Centre line of pipe to end of cover (mm)
L1 Screen length (mm)
D1 Screen diameter (mm)
Fo Free screen area standard element (mm)
KVS1 KVS-Value standardscreen (m3/h)
KVS2 KVS-Value fine screen (m3/h)
Zet1 Zeta-Value standardscreen
Zet2 Zeta-Value fine screen
ø G Outer-diameter coverflange gasket (mm)
ø R Inner-diameter coverflange gasket (mm)
P Thickness coverflange gasket (mm)
D Coverflange size
B Distance required to remove screen (mm)