Strainer PN 10 Y-type welded construction, with flanged ends and drain-plug 1/2” in cover

flanged ends DIN EN 1092-1

Materials:

Body: S355J2H, Cover: P265GH, Flanges: G235JRG2, Screen: stainless steel 1.4301, Gasket: graphite reinforced

Connection:

flanged ends DIN EN 1092-1

Test pressure:

15 bar

DN L A Mesh-width* Weight (kg) Article No.**
200 600 580 2,00 95 0406040320000
250 730 600 2,00 146 0406040325000
300 850 620 2,00 196 0406040330000
350 980 640 3,00 243 0406040335000
400 1100 750 3,00 304 0406040340000
450 1200 850 3,00 398 0406040345000
500 1250 875 3,00 466 0406040350000
600 1450 900 4,00 614 0406040360000
700 1650 1200 4,00 0406040370000
800 1850 1400 4,00 0406040380000

* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"

DN L1 D1 Fo KVS1 KVS2 Zet1 Zet2 ø G ø R P D B
200 700 5 293 200 2 3/4" BSP 900
250 1100 5 328 250 2 3/4" BSP 1000
300 1500 5,5 378 300 2 1" BSP 1050
350 2000 6 438 350 2 1" BSP 1100
400 2500 6,5 489 400 2 1" BSP 1250
450 3200 6,5 539 450 2 1" BSP 1500
500 3900 6,5 594 500 2 1" BSP 1500
600 5600 6,5 695 600 2 1" BSP 1700
700 1" BSP
800 1" BSP

The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.

Key for our datasheets

flanged ends DIN EN 1092-1
DN Nominal diameter
L Face to face dimension (mm)
A Centre line of pipe to end of cover (mm)
L1 Screen length (mm)
D1 Screen diameter (mm)
Fo Free screen area standard element (mm)
KVS1 KVS-Value standardscreen (m3/h)
KVS2 KVS-Value fine screen (m3/h)
Zet1 Zeta-Value standardscreen
Zet2 Zeta-Value fine screen
ø G Outer-diameter coverflange gasket (mm)
ø R Inner-diameter coverflange gasket (mm)
P Thickness coverflange gasket (mm)
D Coverflange size
B Distance required to remove screen (mm)