Strainer PN 20, Y-type with screwed ends and drain plug
Materials: |
Body: brass MS 58, Screen: stainless steel 1.4301 |
Connection: |
screwed ends DIN 259 |
Test pressure: |
30 bar |
Specials: |
Brass fittings are not approved for use in drinking water installations! |
| DN | L | A | Mesh-width* | Weight (kg) | Article No.** |
|---|---|---|---|---|---|
| 3/8" | 55 | 40 | 0,4 | 0,19 | 1006010403800 |
| 1/2" | 58 | 40 | 0,4 | 0,25 | 1006010401200 |
| 3/4" | 70 | 50 | 0,4 | 0,30 | 1006010403400 |
| 1" | 87 | 60 | 0,4 | 0,43 | 1006010404400 |
| 1 1/4" | 96 | 68 | 0,5 | 0,68 | 1006010405400 |
| 1 1/2" | 106 | 75 | 0,5 | 0,92 | 1006010406400 |
| 2" | 126 | 90 | 0,5 | 1,40 | 1006010408400 |
* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"
| DN | L1 | D1 | Fo | KVS1 | KVS2 | Zet1 | Zet2 | ø G | ø R | P | D | B |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/8" | 30 | 18 | 40 % | 2,3 | 2,1 | 2,5 | 2,9 | 30 | 24,2 | 1,0 | 3/8" | 55 |
| 1/2" | 30 | 18 | 40 % | 4,2 | 3,9 | 4,2 | 3,8 | 30 | 24,2 | 1,0 | 1/2" | 60 |
| 3/4" | 40 | 24 | 40 % | 6,5 | 6,1 | 6,6 | 7,1 | 36 | 31 | 1,0 | 3/4" | 80 |
| 1" | 43 | 30 | 40 % | 9,4 | 8,4 | 2,2 | 2,2 | 44 | 37,2 | 1,0 | 1" | 90 |
| 1 1/4" | 49 | 36 | 40 % | 16,5 | 15,4 | 2,1 | 2,5 | 50 | 42,2 | 1,0 | 1 1/4" | 120 |
| 1 1/2" | 53 | 42 | 40 % | 17,0 | 21,6 | 2,5 | 3,8 | 57 | 48,2 | 1,0 | 1 1/2" | 135 |
| 2" | 66 | 53 | 40 % | 33,0 | 29,9 | 3,8 | 4,5 | 68 | 60 | 1,0 | 2" | 170 |
The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.
Key for our datasheets
| DN | Nominal diameter |
| L | Face to face dimension (mm) |
| A | Centre line of pipe to end of cover (mm) |
| L1 | Screen length (mm) |
| D1 | Screen diameter (mm) |
| Fo | Free screen area standard element (mm) |
| KVS1 | KVS-Value standardscreen (m3/h) |
| KVS2 | KVS-Value fine screen (m3/h) |
| Zet1 | Zeta-Value standardscreen |
| Zet2 | Zeta-Value fine screen |
| ø G | Outer-diameter coverflange gasket (mm) |
| ø R | Inner-diameter coverflange gasket (mm) |
| P | Thickness coverflange gasket (mm) |
| D | Coverflange size |
| B | Distance required to remove screen (mm) |