Strainer 800 lbs Y-type, with bw-ends and drain-plug in cover

butt-weld-ends ANSI

Materials:

Body: ASTM A 105, Screen: stainless steel AISI 316, Gasket: graphit reinforced

Connection:

butt-weld-ends ANSI

Test pressure:

205 bar

DN L A Mesh-width* Weight (kg) Article No.**
1/2" 150 105 0,80 1,00 0206525301200
3/4" 150 105 0,80 1,20 0206525303400
1" 150 105 0,80 2,00 0206525304400
1 1/4" 160 145 0,80 6,00 0206525305400
1 1/2" 160 145 0,80 6,00 0206525306400
2" 160 145 0,80 7,00 0206525308400

* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"

DN L1 D1 Fo KVS1 KVS2 Zet1 Zet2 ø G ø R P D B
1/2" 41 18 38% 5,1 5,0 1,56 1,60 36 28,5 3,5 1/4" 190
3/4" 60 22 38% 9,7 9,6 2,22 2,27 41 32,5 3,5 1/4" 190
1" 75 28 38% 14,6 13,3 3,07 3,71 50 40,5 3,5 1/4" 190
1 1/4" 100,5 41,5 38% 32,6 29,9 3,84 4,52 70 57 3,5 1/4" 205
1 1/2" 100,5 41,5 38% 32,6 29,9 3,84 4,52 70 57 3,5 1/4" 205
2" 100,5 49,5 38% 50,3 49,8 3,84 3,92 63 52,5 3,5 1/4" 205

The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.

Key for our datasheets

butt-weld-ends ANSI
DN Nominal diameter
L Face to face dimension (mm)
A Centre line of pipe to end of cover (mm)
L1 Screen length (mm)
D1 Screen diameter (mm)
Fo Free screen area standard element (mm)
KVS1 KVS-Value standardscreen (m3/h)
KVS2 KVS-Value fine screen (m3/h)
Zet1 Zeta-Value standardscreen
Zet2 Zeta-Value fine screen
ø G Outer-diameter coverflange gasket (mm)
ø R Inner-diameter coverflange gasket (mm)
P Thickness coverflange gasket (mm)
D Coverflange size
B Distance required to remove screen (mm)