Strainer PN 25 Y-type, with flanged ends and drain-plug 1/2” in cover

flanged ends DIN


Body: cast steel GP 240GH, Screen: stainless steel 1.4301, Gasket: graphit reinforced


flanged ends DIN

Test pressure:

60 bar


in- and outside coated by electro-static process RAL 5005 blue - 250µ.

DN L A Mesh-width* Weight (kg) Article No.**
200 600 360 1,32 153,00 2032520004

* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"

DN L1 D1 Fo KVS1 KVS2 Zet1 Zet2 ø G ø R P D B
200 290 186 36 % 675,00 570,00 5,50 7,60 260 212 2,0 Ø 345 720

The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.

Key for our datasheets

flanged ends DIN
DN Nominal diameter
L Face to face dimension (mm)
A Centre line of pipe to end of cover (mm)
L1 Screen length (mm)
D1 Screen diameter (mm)
Fo Free screen area standard element (mm)
KVS1 KVS-Value standardscreen (m3/h)
KVS2 KVS-Value fine screen (m3/h)
Zet1 Zeta-Value standardscreen
Zet2 Zeta-Value fine screen
ø G Outer-diameter coverflange gasket (mm)
ø R Inner-diameter coverflange gasket (mm)
P Thickness coverflange gasket (mm)
D Coverflange size
B Distance required to remove screen (mm)