Strainer PN 25/40 Y-type, with flanged ends and drain-plug 1/2” in cover

flanged ends DIN

Materials:

Body: GS-C 25, Screen: stainless steel 1.4301, Gasket: graphit reinforced

Connection:

flanged ends DIN

Test pressure:

60 bar

Specials:

Epoxy paint (wet)inside + outsideRAL 5005, 100-150 microns.

DN L A Mesh-width* Weight (kg) Article No.**
15 130 75 0,54 2,50 2032501502
20 150 75 0,54 3,00 2032502002
25 160 90 0,87 4,00 2032502502
32 180 90 0,87 5,00 2032503202
40 200 110 0,87 7,00 2032504002
50 230 120 0,87 11,00 2032505002
65 290 140 0,87 18,00 2032506502
80 310 165 1,32 23,00 2032508002
100 350 220 1,32 31,00 2032510002
125 400 260 1,32 48,00 2032512502
150 480 300 1,32 61,00 2032515002
200 600 360 1,38 153,00 2034020002

* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"

DN L1 D1 Fo KVS1 KVS2 Zet1 Zet2 ø G ø R P D B
15 62 22,5 39 % 2,70 2,50 2,14 2,50 39 27 1,5 40x98 oval 120
20 62 22,5 39 % 8,80 7,10 2,14 2,50 39 27 1,5 40x98 oval 125
25 86 35 38 % 16,90 15,50 2,14 2,55 56 40 1,5 48x78 oval 150
32 86 35 38 % 25,00 20,60 2,58 3,87 56 40 1,5 54x89 oval 170
40 98 45 38 % 38,00 33,20 2,83 3,67 68 51 1,5 70x72 205
50 111 55 38 % 56,00 47,50 3,11 4,36 84 58 1,5 91x95 250
65 121 63 38 % 89,00 72,70 3,51 5,28 95 71 1,5 100x110 285
80 137 77 38 % 127,00 96,80 4,02 6,90 122 98 2,0 121x131 330
100 169 100 36 % 200,00 167,00 3,92 5,63 137 115 2,0 137x145 415
125 198 120 36 % 332,00 284,00 3,49 4,77 155 126 1,5 175x190 484
150 239 150 36 % 494,00 389,00 3,26 5,26 220 180 2,0 Ø 306 535
200 290 186 36 % 675,00 570,00 5,50 7,60 260 212 2,0 Ø 345 720

The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.

Key for our datasheets

flanged ends DIN
DN Nominal diameter
L Face to face dimension (mm)
A Centre line of pipe to end of cover (mm)
L1 Screen length (mm)
D1 Screen diameter (mm)
Fo Free screen area standard element (mm)
KVS1 KVS-Value standardscreen (m3/h)
KVS2 KVS-Value fine screen (m3/h)
Zet1 Zeta-Value standardscreen
Zet2 Zeta-Value fine screen
ø G Outer-diameter coverflange gasket (mm)
ø R Inner-diameter coverflange gasket (mm)
P Thickness coverflange gasket (mm)
D Coverflange size
B Distance required to remove screen (mm)