Strainer 300 lbs Y-type, with flanged ends and drain-plug 1/2” in cover
Materials: |
Body: stainless steel 1.4408, Screen: stainless steel 1.4408, Gasket: PTFE |
Connection: |
flanged ends ANSI |
Test pressure: |
77 bar |
| DN | L | A | Mesh-width* | Weight (kg) | Article No.** |
|---|---|---|---|---|---|
| 1/2" | 130 | 85 | 1,5 | 3 | 0306535101200 |
| 3/4" | 140 | 87 | 1,5 | 4 | 0306535103400 |
| 1" | 150 | 114 | 1,5 | 6 | 0306535104400 |
| 1 1/2" | 190 | 135 | 2,00 | 12 | 0306535106400 |
| 2" | 210 | 155 | 2,00 | 14 | 0306535100200 |
| 2 1/2" | 270 | 189 | 2,00 | 22 | 0306535121200 |
| 3" | 290 | 200 | 2,00 | 25 | 0306535100300 |
| 4" | 386 | 232 | 2,00 | 36 | 0306535100400 |
* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"
| DN | L1 | D1 | Fo | KVS1 | KVS2 | Zet1 | Zet2 | ø G | ø R | P | D | B |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 60 | 20 | 39 % | 2,7 | 2,5 | 2,14 | 2,5 | 36 | 29 | 2,0 | ||
| 3/4" | 55 | 24 | 39 % | 8,8 | 7,1 | 3,25 | 5,03 | 43 | 34 | 2,5 | ||
| 1" | 87,45 | 29 | 38 % | 16,9 | 15,5 | 2,14 | 2,55 | 48 | 39 | 2,5 | ||
| 1 1/2" | 100 | 43 | 38 % | 38 | 33,2 | 2,83 | 3,67 | 63 | 54 | 2,0 | ||
| 2" | 103,5 | 52 | 38 % | 56 | 47,5 | 3,11 | 4,36 | 72 | 64 | 2,5 | ||
| 2 1/2" | 135 | 68 | 38 % | 89 | 72,7 | 3,51 | 5,28 | 88 | 79 | 2,0 | ||
| 3" | 152 | 85 | 36 % | 127 | 96,8 | 4,02 | 6,9 | 106 | 93 | 2,0 | ||
| 4" | 158,5 | 105 | 36 % | 200 | 167 | 3,92 | 5,63 | 130 | 119 | 3,0 |
The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.
Key for our datasheets
| DN | Nominal diameter |
| L | Face to face dimension (mm) |
| A | Centre line of pipe to end of cover (mm) |
| L1 | Screen length (mm) |
| D1 | Screen diameter (mm) |
| Fo | Free screen area standard element (mm) |
| KVS1 | KVS-Value standardscreen (m3/h) |
| KVS2 | KVS-Value fine screen (m3/h) |
| Zet1 | Zeta-Value standardscreen |
| Zet2 | Zeta-Value fine screen |
| ø G | Outer-diameter coverflange gasket (mm) |
| ø R | Inner-diameter coverflange gasket (mm) |
| P | Thickness coverflange gasket (mm) |
| D | Coverflange size |
| B | Distance required to remove screen (mm) |