Strainer 300 lbs Y-type, with flanged ends and drain-plug 1/2” NPT in cover

flanged ends ANSI

Materials:

Body: cast steel A216 WCB, Screen: stainless steel 1.4301, Gasket: PTFE (1/2"-1-1/2"), graphit reinforced (2"-12")

Connection:

flanged ends ANSI

Test pressure:

77 bar

DN L A Mesh-width* Weight (kg) Article No.**
1/2" 150 82 2,00 1,50 0206535101200
3/4" 150 91 2,00 2,50 0206535103400
1" 150 95 2,00 5,00 0206535104400
1 1/4" 216 2,00 7,00 0206535105400
1 1/2" 190 120 2,00 7,00 0206535106400
2" 267 170 1,20 17,00 0206535100200
2 1/2" 292 200 0,75 20,00 0206535121200
3" 318 235 1,20 38,00 0206535100300
4" 356 290 1,20 54,00 0206535100400
6" 444 320 1,20 81,00 0206535100600
8" 559 510 1,20 140,00 0206535100800
10" 622 445 0,40 207,00 0206535101000
12" 711 470 0,40 225,00 0206535112000

* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"

DN L1 D1 Fo KVS1 KVS2 Zet1 Zet2 ø G ø R P D B
1/2" 60 20 39 % 2,70 2,50 2,14 2,5 36 29 2 150
3/4" 55 24 39 % 8,80 7,10 3,25 5,03 43 34 2,5 150
1" 87,45 29 38 % 16,9 15,5 2,14 2,55 48 39 2,5 185
1 1/4" 74 24 111
1 1/2" 100 43 38 % 38,0 33,2 2,83 3,67 63 54 2 213
2" 125 49 38 % 56,00 47,50 3,11 4,36 70 50 3,5 98x98 300
2 1/2" 130 65 38 % 89,00 72,70 3,51 5,28 85 72 3 111x111 325
3" 145 75 36 % 127,00 96,80 4,02 6,90 95 76 3,5 136x136 365
4" 175 110 36 % 200,00 167,00 3,92 5,63 130 112 3 Ø 194 440
6" 255 137 36 % 494,00 389,00 3,26 5,26 160 138 3,5 Ø 264 575
8" 280 205 36 % 675,00 570,00 5,50 7,60 230 210 3 Ø 290 750
10" 345 240 265 245 3,00
12" 410 290 320 295 3,00 1025

The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.

Key for our datasheets

flanged ends ANSI
DN Nominal diameter
L Face to face dimension (mm)
A Centre line of pipe to end of cover (mm)
L1 Screen length (mm)
D1 Screen diameter (mm)
Fo Free screen area standard element (mm)
KVS1 KVS-Value standardscreen (m3/h)
KVS2 KVS-Value fine screen (m3/h)
Zet1 Zeta-Value standardscreen
Zet2 Zeta-Value fine screen
ø G Outer-diameter coverflange gasket (mm)
ø R Inner-diameter coverflange gasket (mm)
P Thickness coverflange gasket (mm)
D Coverflange size
B Distance required to remove screen (mm)