Strainer PN 6 Y-type, with flanged ends and drain-plug 1/2”BSP in cover

flanged ends DIN

Materials:

Body: cast iron JL 1040, Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301), Gasket: graphit reinforced

Connection:

flanged ends DIN

Test pressure:

9 bar

Specials:

with connection for differential gauge in body DN 15 - DN 40 G 1/4" and DN 50 - DN 250 G 1/2".Valves made of cast iron are not authorized for use in systems subject TRD110.

DN L A Mesh-width* Weight (kg) Article No.**
15 130 75 0,50 2,20 96006015GLT
20 150 75 0,50 3,30 96006020GLT
25 160 90 0,75 3,80 96006025GLT
32 180 90 0,75 5,00 96006032GLT
40 200 110 0,75 6,80 96006040GLT
50 230 120 0,75 7,50 96006050GLT
65 290 140 0,75 11,20 96006065GLT
80 310 165 0,75 15,40 96006080GLT
100 350 220 1,20 23,20 96006100GLT
125 400 260 1,20 33,50 96006125GLT
150 480 300 1,20 47,10 96006150GLT
200 600 360 1,20 99,50 96006200GLT

* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"

DN L1 D1 Fo KVS1 KVS2 Zet1 Zet2 ø G ø R P D B
15 53 25 39 % 5,60 5,50 2,58 2,68 49 40 1,0 70x70 115
20 53 25 39 % 10,70 10,30 2,24 2,41 49 40 1,0 70x70 115
25 66 31 38 % 17,60 16,26 2,02 2,6 55 46 1,0 75x75 135
32 71 38 38 % 29,15 26,60 1,97 2,37 55 46 1,0 75x75 135
40 91 47 38 % 46,10 41,80 1,93 2,34 67 56 1,0 90x90 170
50 105 57 38 % 71,60 63,70 1,95 2,46 74 66 1,0 98x98 190
65 123 73 38 % 119,50 105,40 2,00 2,57 94 83 1,0 111x111 220
80 144 88 36 % 173,50 144,00 2,18 3,16 109 100 1,0 136x136 265
100 184 108 36 % 217,50 196,70 3,38 4,14 134 120 1,0 Ø 194 340
125 219 135 36 % 364,40 320,00 2,94 3,81 158 138 1,5 Ø 234 410
150 258,5 160 36 % 537,00 468,00 2,81 3,70 180 162 1,5 Ø 264 475
200 360 208 36 % 820,00 769,00 3,81 4,33 240 209 2,0 Ø 290 580

The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.

Key for our datasheets

flanged ends DIN
DN Nominal diameter
L Face to face dimension (mm)
A Centre line of pipe to end of cover (mm)
L1 Screen length (mm)
D1 Screen diameter (mm)
Fo Free screen area standard element (mm)
KVS1 KVS-Value standardscreen (m3/h)
KVS2 KVS-Value fine screen (m3/h)
Zet1 Zeta-Value standardscreen
Zet2 Zeta-Value fine screen
ø G Outer-diameter coverflange gasket (mm)
ø R Inner-diameter coverflange gasket (mm)
P Thickness coverflange gasket (mm)
D Coverflange size
B Distance required to remove screen (mm)