Strainer PN 25 Y-type welded construction, with flanged ends and drain-plug 1/2” in cover

flanged ends DIN EN 1092-1

Materials:

Body: S355J2H, Cover: P265GH, Flanges: G235JRG2, Screen: stainless steel 1.4301, Gasket: graphite reinforced

Connection:

flanged ends DIN EN 1092-1

Test pressure:

37,5 bar

DN L A Mesh-width* Weight (kg) Article No.**
200 600 580 2,00 125 0406040520000
250 730 600 2,00 192 0406040525000
300 850 620 2,00 262 0406040530000
350 980 640 3,00 342 0406040535000
400 1100 750 3,00 445 0406040540000
450 1200 850 3,00 545 0406040545000
500 1250 875 3,00 620 0406040550000
600 1450 900 4,00 841 0406040560000
700 1650 1200 4,00 0406040570000
800 1850 1400 4,00 0406040580000

* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"

DN L1 D1 Fo KVS1 KVS2 Zet1 Zet2 ø G ø R P D B
200 700 5 284 200 2 3/4" BSP 900
250 1100 5 340 250 2 3/4" BSP 1000
300 1500 5,5 400 300 2 1" BSP 1050
350 2000 6 457 350 2 1" BSP 1100
400 2500 6,5 514 400 2 1" BSP 1250
450 3200 6,5 565 450 2 1" BSP 1500
500 3900 6,5 624 500 2 1" BSP 1500
600 5600 6,5 731 600 2 1" BSP 1700
700 1" BSP
800 1" BSP

The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.

Key for our datasheets

flanged ends DIN EN 1092-1
DN Nominal diameter
L Face to face dimension (mm)
A Centre line of pipe to end of cover (mm)
L1 Screen length (mm)
D1 Screen diameter (mm)
Fo Free screen area standard element (mm)
KVS1 KVS-Value standardscreen (m3/h)
KVS2 KVS-Value fine screen (m3/h)
Zet1 Zeta-Value standardscreen
Zet2 Zeta-Value fine screen
ø G Outer-diameter coverflange gasket (mm)
ø R Inner-diameter coverflange gasket (mm)
P Thickness coverflange gasket (mm)
D Coverflange size
B Distance required to remove screen (mm)