Strainer PN 16, Y-type with screwed ends plug

screwed ends DIN 259

Materials:

Body: cast iron JL 1040, Screen: stainless steel 1.4301, Gasket: graphit reinforced

Connection:

screwed ends DIN 259

Test pressure:

24 bar

Specials:

Valves made of cast iron are not authorized for use in systems subject TRD110.

DN L A Mesh-width* Weight (kg) Article No.**
3/8" 85 55 0,5 0,60 96501638
1/2" 85 55 0,5 0,60 96501612
3/4" 100 68 0,5 0,90 96501634
1" 120 73 0,75 1,40 96501644
1 1/4" 140 83 0,75 2,00 96501654
1 1/2" 160 97 0,75 3,00 96501664
2" 190 110 0,75 5,00 96501684

* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"

DN L1 D1 Fo KVS1 KVS2 Zet1 Zet2 ø G ø R P D B
3/8" 48,5 18 39 % 2,70 2,40 3,21 4,07 32 27 2,00 R 3/4" 90
1/2" 48,5 18 39 % 5,60 5,50 1,82 1,89 32 27 2,00 R 3/4" 90
3/4" 61,5 25 39 % 10,70 10,30 1,37 1,48 39 33 2,00 R 1" 110
1" 66,5 31 38 % 17,00 16,30 2,16 2,35 49 42 2,00 R 1 1/4" 122
1 1/4" 81,5 38 38 % 28,00 26,60 1,54 1,71 55 48 2,00 R 1 1/2" 142
1 1/2" 95,5 47 38 % 45,00 41,80 1,48 1,72 68 60 2,00 R 2" 165
2" 112,5 57 38 % 69,00 63,70 1,44 1,69 74 66 2,00 R 2 1/4" 190

The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.

Key for our datasheets

screwed ends DIN 259
DN Nominal diameter
L Face to face dimension (mm)
A Centre line of pipe to end of cover (mm)
L1 Screen length (mm)
D1 Screen diameter (mm)
Fo Free screen area standard element (mm)
KVS1 KVS-Value standardscreen (m3/h)
KVS2 KVS-Value fine screen (m3/h)
Zet1 Zeta-Value standardscreen
Zet2 Zeta-Value fine screen
ø G Outer-diameter coverflange gasket (mm)
ø R Inner-diameter coverflange gasket (mm)
P Thickness coverflange gasket (mm)
D Coverflange size
B Distance required to remove screen (mm)